Museum of the Game® & International Arcade Museum® Forums

First off, boardset, harness, and amp board known good.

When I use a switcher with the Arcade Shop adapter for Gorf, I get all the sounds just fine.

When I plug in the linear 90411-B000, it produces all the voltages and the game plays but there is no sound at all. Double-checked all the grounds and they all show continuity with each other and the grounding prong on the plug. All PS connectors cleaned, desoldered and resoldered.

Since this is producing all the proper voltages, and you can adjust each via their pots, AND the grounding also appears correct, I'm stumped.

Input appreciated.
Back
Top Bottom