SOLVED 25” U2000 Standard Resolution Tube Help

[Sbarb18]

I have a standard res U2000 with a horizontal impedance of 1.7 ohms and a vertical impedance of 3.6 ohms. Is 3.6 ohms not low for vertical? I was planning to use the tube in a K7000 chassis but I want to make sure the tube is compatible.

Thanks!

 

[behrmr]

You should be good to go with that tube.

 

[Sbarb18]

You should be good to go with that tube.

Thank you! I'm new to monitor work

 

[behrmr]

Thank you! I'm new to monitor work

No problem. K7000, U2000, U5000, K7400 are all tube & yoke compatible. Just watch where the chassis mounting studs land if you use a K7000 on a frame from any of the others.

 

[Sbarb18]

No problem. K7000, U2000, U5000, K7400 are all tube & yoke compatible. Just watch where the chassis mounting studs land if you use a K7000 on a frame from any of the others.

Awesome! I was just a little worried about the low vertical impedance.

 

[chilibear13]

Awesome! I was just a little worried about the low vertical impedance.

Unless the yoke is damaged or perhaps you just didn't get a good solid reading because they are compatible.