Solomon's Key pcb

cool, thanks for catching that one.
I was lucky enough to find a US version board. I only know of two others.

I wouldnt be surprised to see this fetch double the starting bid.

Also, I wish prOk wouldve redid the marquee for this, SLACK ASS!
 
cool, thanks for catching that one.
I was lucky enough to find a US version board. I only know of two others.

I wouldnt be surprised to see this fetch double the starting bid.

Also, I wish prOk wouldve redid the marquee for this, SLACK ASS!

I picked up one a couple years back. Definitely a 'grail'. :)
 
For those interested, I'll release another illustrator file into the wild :)

Email me for a copy, do not post on the internet. Those are the rules.

The vectorized version is on top, original scan on the bottom in this attachment.
 

Attachments

  • solomon.jpg
    solomon.jpg
    28.6 KB · Views: 44
For those interested, I'll release another illustrator file into the wild :)

Email me for a copy, do not post on the internet. Those are the rules.

The vectorized version is on top, original scan on the bottom in this attachment.

Did you happen to do the instruction sticker I sent too?
 
It doesnt. The bottom left hand side should be stamped Tecmo, its not.
The cables are different also, but that doesnt always mean much.

I have the japanese version of that instruction card also. Standard Tecmo Side art would work, but a CPO would be nice. Or a bezel made from those cards. If that ever happens, Id like to get in on that action.
 
It doesnt. The bottom left hand side should be stamped Tecmo, its not.
The cables are different also, but that doesnt always mean much.

I have the japanese version of that instruction card also. Standard Tecmo Side art would work, but a CPO would be nice. Or a bezel made from those cards. If that ever happens, Id like to get in on that action.

I am thinking of talking to mamemarquees to print stuff, but Im no illistrator guru by any means. Are you? I was thinking an overlay made from the marquee with instruction decals that go around the buttons, kinda like arkanoid. Something easy. Side art??ideas?
 
Tecmo had a bunch of standard overlays and side art. Thats alot less exciting though.

I am no good at illustrator. There has to be some folks out there that could help out. Id help pay for someone to slap together a CP or bezel. Bezel would be pretty standard and can be sized to fit most any cab, but the overlay is gonna depend on the cab it goes into.
 
Tecmo had a bunch of standard overlays and side art. Thats alot less exciting though.

I am no good at illustrator. There has to be some folks out there that could help out. Id help pay for someone to slap together a CP or bezel. Bezel would be pretty standard and can be sized to fit most any cab, but the overlay is gonna depend on the cab it goes into.

Thats kinda why I suggested the genereic cpo with the arkanoid style button decals. Not sure what else to do. I am gonna put min in a dynano cut corner cab. I'd help pay for the design too, if there is anybody who wants to design a Sk cpo, side art & bezel..... I have an instruction decal I have scanned...
 
Back
Top Bottom