Hey everyone. Putting a couple of my pins on the chopping block to help fund the purchase of a Wizard Of Oz. I've been playing TAF for 20 years and now it's time to pass it on for someone else to enjoy. I've had my fun with it. The machine is located in Wichita, KS. If you are interested, hit me up. Here are the deets...
Fully working with no known issues. The machine spent some time over in Germany before I got it. It was set for Deutschmarks (the DM on the coin rejects). At some point when it was over there, they drilled a hole in the side (I don't know why) and installed a "plug" for the hole at some point later. You can see it in the pictures. It never really bothered me so I didn't do anything about it. I bought the machine years ago from a fellow KLOV'er but I can't remember from who. Since then, I've done just about everything to it that can be done without going overboard. It's fully loaded. I installed a full LED kit, fully shopped it (a few years ago but minimal plays since doing so), installed a flipper rebuild kit, installed custom spot lights and eject hole lights, Uncle Fester, Bear Skin Ramp Rug, lots of decals, etc. There is zero magnet burn, no playfield wear (to the best of my knowledge), it's been cleaned, waxed, and ready to go. All the boards are in great shape, no physical damage, the battery holder has been replaced with a lithium button cell holder so there's no more worry about corrosion, ColorDMD!, Gold Edition roms, the whole shebang! KLOV price...$6499.
Any questions or interest, please let me know. Thank you.








Fully working with no known issues. The machine spent some time over in Germany before I got it. It was set for Deutschmarks (the DM on the coin rejects). At some point when it was over there, they drilled a hole in the side (I don't know why) and installed a "plug" for the hole at some point later. You can see it in the pictures. It never really bothered me so I didn't do anything about it. I bought the machine years ago from a fellow KLOV'er but I can't remember from who. Since then, I've done just about everything to it that can be done without going overboard. It's fully loaded. I installed a full LED kit, fully shopped it (a few years ago but minimal plays since doing so), installed a flipper rebuild kit, installed custom spot lights and eject hole lights, Uncle Fester, Bear Skin Ramp Rug, lots of decals, etc. There is zero magnet burn, no playfield wear (to the best of my knowledge), it's been cleaned, waxed, and ready to go. All the boards are in great shape, no physical damage, the battery holder has been replaced with a lithium button cell holder so there's no more worry about corrosion, ColorDMD!, Gold Edition roms, the whole shebang! KLOV price...$6499.
Any questions or interest, please let me know. Thank you.








Last edited:




































