SOLD - PARTS ***SOLD*** Donkey Kong pcb (2 board)

dkblue

Member
Joined
Apr 14, 2008
Messages
557
Reaction score
23
Location
Louisville, Kentucky
Rating - 100%
27   0   0
Works well, but the jump sound is a little funky. There's some good info below on fixing this....

$185 shipped to the lower 48 - gifted or cover fees.
 

Attachments

  • 20180129_184347.jpg
    20180129_184347.jpg
    201 KB · Views: 84
  • 20180129_184343.jpg
    20180129_184343.jpg
    225.7 KB · Views: 86
  • 20180129_190013.jpg
    20180129_190013.jpg
    418.5 KB · Views: 85
  • 20180129_190021.jpg
    20180129_190021.jpg
    411.1 KB · Views: 73
Last edited:
Works well, but the jump sound is a little funky. Probably just a fuse...

or the eprom at 3F or 3H on the CPU. Asking $250 shipped.
The jump sound is an analog sound. The way to test it is to Find 6L on the CPU board. Ground pin 9 for walking sound, pin 11 stump sound or pin 13 for jump sound. Follow pin 13 back and look at the transistors and caps in this area. It has to be one of them.
 
The jump sound is an analog sound. The way to test it is to Find 6L on the CPU board. Ground pin 9 for walking sound, pin 11 stump sound or pin 13 for jump sound. Follow pin 13 back and look at the transistors and caps in this area. It has to be one of them.

I did not realize that, thanks for the info.

Based on this new info, if I don't get around to working on it, how's $225 shipped sound?
 
Back
Top Bottom