SOLD - PARTS SNK Neo Geo Complete Wiring with Credit Displays & Iso Trans

gsrogers

Well-known member

Donor 2023-2024
Joined
Apr 25, 2007
Messages
6,398
Reaction score
1,108
Location
Friendswood, Texas
Rating - 99.5%
221   1   0
Carefully pulled from a 2-player cabinet. Complete wiring with both credit displays and the iso transformer.
$135 shipped to Continental US
Paypal F&F please
Thanks
Garry
 

Attachments

  • IMG_8716.jpeg
    IMG_8716.jpeg
    1.6 MB · Views: 55
  • IMG_8717.jpeg
    IMG_8717.jpeg
    1.3 MB · Views: 47
  • IMG_8718.jpeg
    IMG_8718.jpeg
    1.4 MB · Views: 41
  • IMG_8719.jpeg
    IMG_8719.jpeg
    1.1 MB · Views: 38
  • IMG_8720.jpeg
    IMG_8720.jpeg
    1.3 MB · Views: 42
  • IMG_8721.jpeg
    IMG_8721.jpeg
    1,000.9 KB · Views: 42
  • IMG_8722.jpeg
    IMG_8722.jpeg
    1.1 MB · Views: 42
  • IMG_8723.jpeg
    IMG_8723.jpeg
    1.4 MB · Views: 38
  • IMG_8724.jpeg
    IMG_8724.jpeg
    1.3 MB · Views: 41
  • IMG_8725.jpeg
    IMG_8725.jpeg
    1.1 MB · Views: 51
I cant remember how many slots....but does it matter with regards to the wiring?

Open to offers
No, the wiring should be the same except this setup is likely a 2 slot. The 4/6 slots have a memory card board that requires additional wiring.
 
It was from the standard red cabinet that has always had a 2 slot, at least the ones I have owned. I just can't remember if it was changed along the way. So I would feel comfortable saying 2-slot. I am more than happy to check something out for you.
 
Last edited:
No, the wiring should be the same except this setup is likely a 2 slot. The 4/6 slots have a memory card board that requires additional wiring.

But isn't the card harness completely separate from the rest JAMMA harness. The one 2-slot i had and a 4-slot all simply had the card harness just hanging from the control panel, completely divorced from the jamma harness.
 
But isn't the card harness completely separate from the rest JAMMA harness. The one 2-slot i had and a 4-slot all simply had the card harness just hanging from the control panel, completely divorced from the jamma harness.
Correct, the card wires are 2 ribbon cables and 1 cable for the headphone jack. What I mean is I don't see that here, making it likely this setup is for a 2 slot where the memory card parts are on the main PCB.
 
Back
Top Bottom