andrewb
Well-known member
SNK LS-30 rotary joystick pair, with cables, refurbished - $165 shipped
I went through my stash of parts recently, and put together a few nice SNK rotary sticks. These are fully working, in excellent condition (i.e., not overly worn), and tested.
Details:
- Upper square restrictor holes are in good condition, low wear
- All 4 microswitches tested and working
- Rotary position switch tested and working
- Metal posts (which prevent the switch from rotating) are in excellent shape. They did have slight wear grooves in them, however I rotated the posts 90 degrees, so the unworn side is now exposed. This effectively makes them like new.
- Springs are intact, not broken
- Knobs are in good condition (missing inserts, see below)
- Includes dust washers
These are in excellent shape, and are in nearly matched condition (i.e., they look and feel the same.) The one detail is that they do not include the plastic inserts for the knobs. (These are somewhat hard to come by, as they are often broken and/or missing entirely). You could probably find someone here on KLOV to 3D print you a pair, however they are purely cosmetic, and do not affect the operation of the sticks.
I will also include a pair of 13-pin cables for them.
$165 shipped for the pair, in the US. Int'l shipping extra.
I went through my stash of parts recently, and put together a few nice SNK rotary sticks. These are fully working, in excellent condition (i.e., not overly worn), and tested.
Details:
- Upper square restrictor holes are in good condition, low wear
- All 4 microswitches tested and working
- Rotary position switch tested and working
- Metal posts (which prevent the switch from rotating) are in excellent shape. They did have slight wear grooves in them, however I rotated the posts 90 degrees, so the unworn side is now exposed. This effectively makes them like new.
- Springs are intact, not broken
- Knobs are in good condition (missing inserts, see below)
- Includes dust washers
These are in excellent shape, and are in nearly matched condition (i.e., they look and feel the same.) The one detail is that they do not include the plastic inserts for the knobs. (These are somewhat hard to come by, as they are often broken and/or missing entirely). You could probably find someone here on KLOV to 3D print you a pair, however they are purely cosmetic, and do not affect the operation of the sticks.
I will also include a pair of 13-pin cables for them.
$165 shipped for the pair, in the US. Int'l shipping extra.
Attachments
Last edited: