Smash TV restore - Wiring help

ThomasM

Member

Donor 2016
Joined
Mar 7, 2016
Messages
816
Reaction score
6
Location
Berkeley, California
Hi all - so I'm working through a complete restore of a Smash TV - I picked up an empty cabinet with some somewhat original wiring, but some of the wiring I believe was hacked for a conversion - perhaps a Golden Tee or something.

I'm now trying to work my way through wiring diagrams and the wiring that I have, and as a relative newbie to arcade wiring and electrical diagrams, trying to learn on the way.

I've uploaded some photos I've taken and tried to make it easy if anyone can help me out or point me in the right direction?

Any help is appreciated, I have been watching Youtube videos of what I can find that's relevant and trying to read up - and hoping to ramp up on my knowledge here along the way.

Thanks!
 

Attachments

  • SmashTV_Wiring.001.jpg
    SmashTV_Wiring.001.jpg
    219.2 KB · Views: 26
  • SmashTV_Wiring.002.jpg
    SmashTV_Wiring.002.jpg
    225.3 KB · Views: 21
  • SmashTV_Wiring.003.jpeg
    SmashTV_Wiring.003.jpeg
    998.9 KB · Views: 17
  • SmashTV_Wiring.004.jpeg
    SmashTV_Wiring.004.jpeg
    889.3 KB · Views: 16
  • SmashTV_Wiring.005.jpeg
    SmashTV_Wiring.005.jpeg
    866.8 KB · Views: 16
i think pic 1 & 3 go together. pic 1 is your AC supply connection. i ASSUME pic 3 is your AC supply feed. the last pic that red bundle looks like it used to go to a door switch. you really need a schematic and go through it. cab wiring it easy with a schematic.
 
Thanks - any idea what's going on with pic 2 - the wires spliced into a power plug? I assumed this would be the AC supply feed also given it has 3 wires. In Pic 1 the AC supply connection has 3 wires but in pic 3 that connector has two wires...
 
So my confusion with Pic 1 being the AC power connection and Pic 3 being the AC power supply feed is that 1 has 3 wires into the connector and 3 has 2 wires. Anyone know what's going on here?
 
Back
Top Bottom