SmartyPi Outrun Dipswitch Settings

Kyrosfear

Well-known member

Donor 4 years: 2012, 2018, 2020, 2025
Joined
Apr 4, 2012
Messages
3,074
Reaction score
36
Location
Pennsylvania
Gentlemen,
I am running a SmartyPi Outrun board in my UR. Great product. Easy install.

When I press the cabinet "Test" button, I go into the SmartyPi test menu. Perfect. There are a lot of settings you can change in there, but I can only activate the soft dips for bank "B". Bank "A" is listed (and contains coin settings), but I cannot get to them. Only bank "B".

The board shipped with "A" set to Free Play, and I want to change it to take coins. But I cannot figure out how. I reached out to Mart (owner of SmartyPi) but have not heard back yet.
Any help is appreciated,
-Dustin (Kyrosfear)
 
I am pretty sure you can plug a usb keyboard and invoke the MAME menu by pressing the tab key, there might a way to change the DIPs that way.

p
 
I ran into something similar on mine. Try holding the start button while pressing test to switch between banks A and B in the SmartyPi menu. If that doesn't do it, there might be a firmware setting that locks A.
 
I am pretty sure you can plug a usb keyboard and invoke the MAME menu by pressing the tab key, there might a way to change the DIPs that way.

p
The above should work, see below for Hang On.


p
 
Back
Top Bottom