Small Misc PCBS

orion3311

Well-known member

Donor 2013
Joined
Nov 25, 2008
Messages
5,217
Reaction score
30
Location
Blue Bell, Pennsylvania
Rating - 100%
32   0   1
(Created a new thread due to goofed up title on the other one)

So I'm cleaning up and finally weeding through some stuff I got recently. I have a handful of misc little boards from various things, some of which I'll never use so hopefully someone else can use them here.

Most of these should be considered "parts" boards or as-is/untested/probably not working unless I specify otherwise. Anything without a price is "make offer" - unless its really worth something just make it worthwhile for me to put it in a box/package and get to the post office, at least $10 or 2 or $10 :) Several of these boards have good parts/chips on them so they're worth at least $10 + shipping.


QTY Description
----------------------------
(1) Non-Working Megatouch CRT-260 PCB (For Megatouch 4-7)
(2) Shinobi Power Supplies - $15 ea plus shipping
(1) Primal Rage Board - Make Offer (tried to test but my Dynamo Power supply didn't have enough juice - will try again later)
(1) Kortek KTN-2001 Chassis w/remote board for parts (Chassis itself is ok and may work - neckboard and remote board are damaged) -$20+shipping
(2) Midway 90412 Power Supplies - one in decent condition (a little dirty) and another in "parts" condition (beat up) - $25 for the pair plus shipping
(1) Midway 90414 Power Supply
(X) Grayhound Crane CPU Rev-2 boards (SOLD)
(2) Grayhound Crane UV-1 boards
(1) Galaga Video PCB (missing chips)
(1) SMS Manufacturing (Claw Controller?) has Z80, a rom, an AY sound chip
(1) SMS Manufacturing "Claw Rev 0" looks like a small power supply pcb with 3055 & Fuse
(1) Astro Fighter CPU board - looks good
(1) Midway "Sounds Good" board: A080-91863-B000 (Has power drive ROMS)(Used for Rampage and others - good condition)
(1) Williams (Defender?) Power Supply - missing some parts (fuse holders, transistor (3055?), plug pin. Has heat sink on board
(1) Berzerk Audio Board - has one broken resistor and one broken diode - I can possibly fix if someone needs it bad
(1) "PDPI version 2" board - this allows a Citizen receipt printer to replace a ticket dispenser - info can be found via Google - $20+shipping
(*) MANY Boards from Data-East Casette system (no backplane though)

Other:

Amidar Manual and Shematics - $15 shipped
Playchoice Cab wired for Jamma - needs control panel or control panel wired - Make Offer



*****
 
Last edited:
Bump - added items and now adding pics...
 

Attachments

  • Grayhound UV-1 Board.jpg
    Grayhound UV-1 Board.jpg
    99.3 KB · Views: 11
  • Kortek_Chassis.jpg
    Kortek_Chassis.jpg
    90.8 KB · Views: 15
  • Kortek_Neck.jpg
    Kortek_Neck.jpg
    87.4 KB · Views: 15
  • Shinobi_Power.jpg
    Shinobi_Power.jpg
    94 KB · Views: 15
Midway Power Supply Pics...

Midway Power Supply Pics...
 

Attachments

  • Midway 90412-A.jpg
    Midway 90412-A.jpg
    94.7 KB · Views: 10
  • Midway 90412 Parts Board.jpg
    Midway 90412 Parts Board.jpg
    93.3 KB · Views: 7
  • Midway 90414.jpg
    Midway 90414.jpg
    88.5 KB · Views: 7
Back
Top Bottom