Slow Pacmaze on Mr & Mrs Pacman Pinball Solution

dieseldogpi

Member
Joined
Nov 19, 2009
Messages
432
Reaction score
0
Location
Selden, New York
Slow Pacmaze on Mr & Mrs Pacman Pinball Solution

A while back I had asked the question if anyone knows why the pacmaze on my Bally Mr & Mrs Pacman pin would be slow all the time. After having a new Alltek ultimate mpu board in there with no improvement, triple checking the lamp driver board...still nothing. I then, on a hunch, looked at the flipper button that moves Pacman in the maze. Sure enough, there are two switches, one for the actual flipper,and the other is for the Pacmaze...which was not making contact. After a switch adjustment, it worked perfectly. I guess it wasn't that it was slow, it just was moving on its own. Finally all the kinks were worked out.

TL;DR: "Slow" pacmaze was due to flipper switch being out of adjustment.
 
Thanks!

Even though this is more than two years later, thanks for posting it. My machine has the same problem. I'm going to attempt to adjust the switch tonight.
 
Back
Top Bottom