shilmover
Well-known member
For those that did not see it in the other FS forum. The order for these has been placed and the process of its production has began.
It should take about 30 days to print, I will drive down to Portland to pick up and they will be shipped within 2 weeks.
First the CPO:
- Being printed by Rich at This Old Game
- Silk Screened, not inkjet
- Will fit the Takeman Multivector Control Panel. Note: They will NOT fit a standard Space Duel or Gravitar Control Panels. Again, the will NOT fit a standard SD CP!
- Will be pre-punched to the Takeman Multivector CP
- Will ship rolled
You can order the CPO in one of two formats:
1. As shown in the picture below, pre-punched
2. Without the Textbox and the 2 small buttons (Menu/Credit) and NOT punched. That section will black. You will need to cut out the holes yourself once the CPO is applied. I will not refund any CPOs that are miscut.
And the Marquee:
- Is being printed on 3/16" glass just like the SD/BW/Gravitar marquees.
- Will fit in those cabinets
- Will ship in a new box, extra packed, with insurance. Should one break, there will be enough to replace it.
I may be printing some of these marquees on Plexi if there is enough demand (I would need at least 10 Plexi requests). Price for Plexi is the same, but shipping will be lower (I will refund the difference on shipping if you order plexi).
Prices:
CPO: $60 Shipped
Marquee: $60 Shipped
If you order both a CPO and Marquee, I will send you a T-Shirt (and an extra bonus...), just let me know the size. Still finalizing the T-Shirt, but it would be like the picture below:
You can paypal to barry (at) shilmover (dot) com and let me know the following:
- Name
- Address
- KLOV Name
- # of CPOs (and which type - 1 for as shown in the picture/pre-punched or 2 for no text box/not punched)
- # of Marquees
- T-Shirt size if you ordered both a CPO and a Marquee
Shipping may be lower if you order multiple CPOs, however, I prefer to ship the Glass Marquees separately. If you are outside the Continental US, Ping me and we can figure out shipping.
Let me know if you have any questions.
It should take about 30 days to print, I will drive down to Portland to pick up and they will be shipped within 2 weeks.
First the CPO:
- Being printed by Rich at This Old Game
- Silk Screened, not inkjet
- Will fit the Takeman Multivector Control Panel. Note: They will NOT fit a standard Space Duel or Gravitar Control Panels. Again, the will NOT fit a standard SD CP!
- Will be pre-punched to the Takeman Multivector CP
- Will ship rolled
You can order the CPO in one of two formats:
1. As shown in the picture below, pre-punched
2. Without the Textbox and the 2 small buttons (Menu/Credit) and NOT punched. That section will black. You will need to cut out the holes yourself once the CPO is applied. I will not refund any CPOs that are miscut.
And the Marquee:
- Is being printed on 3/16" glass just like the SD/BW/Gravitar marquees.
- Will fit in those cabinets
- Will ship in a new box, extra packed, with insurance. Should one break, there will be enough to replace it.
I may be printing some of these marquees on Plexi if there is enough demand (I would need at least 10 Plexi requests). Price for Plexi is the same, but shipping will be lower (I will refund the difference on shipping if you order plexi).
Prices:
CPO: $60 Shipped
Marquee: $60 Shipped
If you order both a CPO and Marquee, I will send you a T-Shirt (and an extra bonus...), just let me know the size. Still finalizing the T-Shirt, but it would be like the picture below:
You can paypal to barry (at) shilmover (dot) com and let me know the following:
- Name
- Address
- KLOV Name
- # of CPOs (and which type - 1 for as shown in the picture/pre-punched or 2 for no text box/not punched)
- # of Marquees
- T-Shirt size if you ordered both a CPO and a Marquee
Shipping may be lower if you order multiple CPOs, however, I prefer to ship the Glass Marquees separately. If you are outside the Continental US, Ping me and we can figure out shipping.
Let me know if you have any questions.
