Slick Shot IR test

AtomicBomb

Member
Joined
Sep 11, 2011
Messages
402
Reaction score
9
Location
Boston, Massachusetts
So I'm having some trouble with the Slick Shot I just picked up. It's probably a voltage/IR board problem, but I'm trying to test this thing and I don't seem to have an IR Test in the options menu. The menus also seem to be in a different order than the manual states. Anyone have info on this? Are there multiple board revs and the later ones don't have this test? I've already noticed some small differences between my (dedicated) machine and the manual like a 19" monitor instead of the 25" mentioned in the manual.
 
So I'm having some trouble with the Slick Shot I just picked up. It's probably a voltage/IR board problem, but I'm trying to test this thing and I don't seem to have an IR Test in the options menu. The menus also seem to be in a different order than the manual states. Anyone have info on this? Are there multiple board revs and the later ones don't have this test? I've already noticed some small differences between my (dedicated) machine and the manual like a 19" monitor instead of the 25" mentioned in the manual.

The power leading to the IR is the trick on Slick Shot and Super Strike games. Apparently there's a way to wire in power directly instead of going through the PCB. I've never seen a before and after so don't really have a clue about that. Perhaps a little searching on the boards is due...
 
Back
Top Bottom