Size of cocktail Ms. Pac-man overlay

Xyla

Active member

Donor 2011
Joined
Apr 19, 2011
Messages
964
Reaction score
152
Location
San Antonio, Texas
Hi,

I've been putting together a Jr. Pac-man cocktail from what used to be a partially intact Ms. Pac-man cocktail. I was able to get Jr. Pac-man CPOs printed from vector files I found online, but they did not line up quite right with the holes on the control panels.

I am going to scale the art files I have to the correct size, and change the hole size/positions, but unfortunately I already removed the old Ms. Pac-man overlays, so I don't know what the correct size is.

Would someone be able to help by giving me the precise dimensions of a correct overlay?

Thank you.
 
Check the twobits.com site. They normally have sizes and scans of the art so you can base off that. Make sure it WAS a factory Ms. Pac. You can tell by the width of the panel. If it is 11", it's a Pac.
 
Check the twobits.com site. They normally have sizes and scans of the art so you can base off that. Make sure it WAS a factory Ms. Pac. You can tell by the width of the panel. If it is 11", it's a Pac.

Ah, thank you. Twobits says they are 9" wide, and the overlays I printed were 8 5/8" wide. 9" seems like it would be correct.
 
Are you using the files on arcadeartlibrary? If yes, those have incorrect hole placement and I recommend you remove them if you have a vector program.
 
Last edited:
Back
Top Bottom