Silver Strike USB error

XcALiBrE

New member
Joined
Aug 25, 2004
Messages
285
Reaction score
1
Location
Asheboro, North Carolina
first version of SSB, and it's saying USB error, check all connections and wait 10 secs and turn back on.

all connections are fine. it gets power, and the board lights up. any idea what I need to do, or get? never had one before. picked it up today for $40 figured it was worth it.
 
Reform (make smaller) the 4 wire power connectors that go from the I/O board to the computer. Do this at both ends of the power wires. Spray some electrical de-oxidation spray on the I/O and computer ports. If this still does not work, order the power wires from IT and replace them.

Clay
 
that seemed to work, now It goes through most of the boot sequence, and says:
Stopping database
Killing Processes
Killing Remaining Processes
Stopping Loopback Interface

and keeps rebooting after that.

any thoughts?
 
Sounds like the hard drive has a problem. Reload the software.
 
it didn't come with the software, plus the CPU has no cd-rom drive. i guess i'll have to replace the hdd. anyone know where I can get the CHD?
 
Back
Top Bottom