silent scope pcbs

fast-ed

New member
Joined
Jan 8, 2012
Messages
2,500
Reaction score
31
Location
potosi, Missouri
i have 2 silent pcbs, original and silent scope 2, both show hardware error # 11. i would be willing to give one to somebody for fixing the otherone. let me know if your are interested. ed
 
Are any of the Rtc's socketed ? If so it's just replacing the chip otherwise it's gotta be desoldered and someone should solder a socket there first
 
It's the real time clock chip. Idk what card your referring to. There's a lot of threads on the subject. My silent scope 1 Pcb the chip is soldered to the board. My silent scope 2 pcb the chip is socketed so it can be replaced easily.
 
My Gradius 4 has a rtc chip and it's dead, but still boots fine, didn't realize that silent scope won't boot without the rtc :/
 
ok i took the covers off of the pcbs and all the chips look to be socketed. ss1 has hornet version 1.20 and ss2 has hornet version 1.02. who sells chips and which one do i change? ed
 
Back
Top Bottom