Shimmer on graphics 19" monitor using a K7000 Chassis

cabsR4pimps

New member
Joined
Dec 30, 2009
Messages
725
Reaction score
3
Location
Rockaway Beach, Missouri
Shimmer on graphics 19" monitor using a K7000 Chassis

After installing a new flyback, hot and a cap kit as part of maintenance.
I now have a shimmer effect on some of the graphics, but some things look fine, like text.
Any ideas on where to look for problems?
 
yes you can. use ohms and measure from the wiper to one side of the pot and see if the value rises or falls smoothly as you turn it.
if it is erratic your pot is probably dirty or has a dead spot.

also you will have to wiggle them with your fingers to see if there is any cracks in them. some of the small hair line cracks you cant see it you don't do this.

i have cracked pots many times when working on chassis. it is easier to do than you might think. they can be fragile little things.

Peace
Buffett
 
Back
Top Bottom