Just picked up an R-Type with an XM-2001n in it. It currently has a whitewashed screen with raster lines going through it even with the screen, brightness and sub-brightness controls turned all the way down. I've already done the following:
Cap kit has been installed
Reflowed solder on both pcb's
Checked and cleaned guns with a rejuvenator
Adjusted B+ to 110v per the manual
Am I missing something? Would this be caused by a bad flyback?
Thanks.
Kirby
Cap kit has been installed
Reflowed solder on both pcb's
Checked and cleaned guns with a rejuvenator
Adjusted B+ to 110v per the manual
Am I missing something? Would this be caused by a bad flyback?
Thanks.
Kirby


