Sharp x2001 dead

shilmover

Well-known member
Joined
Oct 28, 2007
Messages
5,073
Reaction score
586
Location
Washington
I have a sharp xm2001.

Both fuses are good. Flyback rings good.

Monitor does not come on (Degaussing circuit works).

Thoughts on where to start?
 
Is your Power Supply putting out any voltages ? Is there 165v going to the neckboard?

There is 120v going to the monitor (this monitor was modified to use 110 rather than 100 by the factory. its from a Blasteroids game).

Where should I test for the 165v?
 
i have one of these you can have
its non working
i saved it cause i thought someday i may need parts
but so far its collecting dust

nice shape
no screen burn if i remember
maybe you just want the chassis ?
cheaper to send that way anyway

let me go double check and i cant get into my storage unit till tomorrow but im positive its an xm2001
 
i have one of these you can have
its non working
i saved it cause i thought someday i may need parts
but so far its collecting dust

nice shape
no screen burn if i remember
maybe you just want the chassis ?
cheaper to send that way anyway

let me go double check and i cant get into my storage unit till tomorrow but im positive its an xm2001

That would be cool...

Let me know...
 
Back
Top Bottom