Sharp Image SI-727R-DS vertical collapse

tobyocc

Well-known member
Joined
Dec 9, 2008
Messages
1,290
Reaction score
82
Location
Temecula, California
Ok, so I have vertical collapse on this monitor (never worked on a SI monitor) Solder looks pretty good all around. Boards look really clean. Just seeing if this is a common thing for this monitor and where to start poking around and replacing.

Thanks
 
cap kit for sure on those has made a big difference on the few i have worked on.
 
yeah kind of new that was the answer but just making sure these don't have some weird issue elsewhere I should look out for.
 
the few i have worked on never needed flybacks either and they seem pretty solid flybacks.
 
TDA1675 vertical deflection IC or possibly an open resistor that is tied to the supply voltage line for the vertical deflectoin ic. Could be one or the other or both.


Ok, so I have vertical collapse on this monitor (never worked on a SI monitor) Solder looks pretty good all around. Boards look really clean. Just seeing if this is a common thing for this monitor and where to start poking around and replacing.

Thanks
 
Back
Top Bottom