rockinganker
Member
I picked up a Beach Head 2000 / 2002 Combo machine and in it was an SI-327V. I am having no luck getting the Horizontal size to adjust at all. I took the chassis out and took a look around and found several cold solder joints and a cap that had exploded. I am guessing that is my issue but, I don't know what value of that cap should be for sure.
Looking at the marking, it looks like C628 and the old cap read 2.2uf 50v NP. I just want to double check before replacing with a new piece.
So, anyone have a SI-327V kicking around that they can check?
Thanks in advance,
Terry
Looking at the marking, it looks like C628 and the old cap read 2.2uf 50v NP. I just want to double check before replacing with a new piece.
So, anyone have a SI-327V kicking around that they can check?
Thanks in advance,
Terry
Attachments
Last edited: