SF2 Jamma in KI Cab

mordzy

New member
Joined
May 15, 2010
Messages
55
Reaction score
0
Location
Leeds, West Yorkshire, United Kingdom
Hi,

I have a KI cab and want to put my SF2 Turbo jamma in. i think i read somewhere that the KI jamma runs -5v which is only used for midway games..

Do i need to get a kick harness or remove the -5v wire on the PSU. i dont wanna blow my board.

Cheers
 
you will not blow the board up. I think the only exceptions to the rule were the Neo-Geo stuff, if I'm not mistaken -5 can damage those.

you will however need a different kick harness. I don't even know what the CPS1 kick harness looks like, lol.

try www.jammaboards.com
 
according to some genius at the Neo-Geo forums, "they're pretty easy to make"

I don't know any UK suppliers, no. best I can conjure up here is to maybe make your own, I don't know what size pins those are, it almost looks like one of those little Japanese monitor RGB signal headers.
 
Yes it is. The MK kick harness is completely different than the CPS-1 harness. Just order a new one from Jammaboards.com. They are not that expensive.
 
well I think the problem is he's in UK. but I'm sure they ship overseas too. give it a whirl.
 
Back
Top Bottom