Sega System 8 to JAMMA Adapter

GunSmoke Guy

Well-known member
Joined
Oct 19, 2006
Messages
2,827
Reaction score
138
Location
New York, New York
Rating - 100%
12   0   0
Lookin' for a Sega System 8 to JAMMA Adapter, any one have one for a decent price shipped ? I want the PCB type not the Wire ones... Thanks.

as an example this is a system 16 for a fair price of $14.95 on jammaboards, but they don't seem to carry the system 8's ??

segasystem16tojammaadap.jpg
 
Funny. I just used a PCB creator program and drew up a JAMMA harness to System 8 board adaptor the other day.

However, I don't know of a place that will print them for under $20/each (minimum order of 3), and then I'd have to add the connectors myself. Probably not cost efficient to make and sell at this time. I doubt people wanna pay $35 for an adaptor...
 
I'm sure some one has em' for a reasonable price, I'm really surprised no one tried to corner the system 8 adaptor market yet. I guess those games just aren't as popular ?
 
Lookin' for a Sega System 8 to JAMMA Adapter, any one have one for a decent price shipped ? I want the PCB type not the Wire ones... Thanks.

as an example this is a system 16 for a fair price of $14.95 on jammaboards, but they don't seem to carry the system 8's ??

segasystem16tojammaadap.jpg


I made System 8 to JAMMA years ago, and may have some left, but if you think $15 is a "fair price" for small run custom made PCBs , I won't even bother looking for them.
 
I made System 8 to JAMMA years ago, and may have some left, but if you think $15 is a "fair price" for small run custom made PCBs , I won't even bother looking for them.


That's sort of the response I gave. I drew up the circuit layout to test System 8 cabs on a JAMMA test bench, but one of the places has a minimum order of 3 boards @ $20 each (self-routed), and a bit more for tabbed routing. Figure in connectors, time to add them, and such, and you'd have to sell them for $35 each just to make a LITTLE bit of money....
 
Any one have one of these ?? I thought mark had em' but didnt email me back and his PMs are turned off.. mspaeth ?

Still need a pcb system 8 to jamma adaptor
 
Back
Top Bottom