Sega Naomi 2 GD rom System Setup

Gambeno

Member
Joined
Oct 2, 2010
Messages
439
Reaction score
1
Location
Rocky Mount, Virginia
Wondering if their is any information or video's out there that shows how to setup a N2 with a GDROM and a Capcom I/O to jamma and Power supply.
Thanks,
Kane
 
Thanks for the link, its really confusing stuff for a noob like me. From what I'm getting is since I have the Capcom I/O I can take a regular 5v line from the I/O and turn it into a 3.3V to run the Naomi Board and GDrom? So confused lol. I wish i had a diagram for it lol or a sega PSU.
 
Thanks for the link, its really confusing stuff for a noob like me. From what I'm getting is since I have the Capcom I/O I can take a regular 5v line from the I/O and turn it into a 3.3V to run the Naomi Board and GDrom? So confused lol. I wish i had a diagram for it lol or a sega PSU.

Funny, cause the Capcom unit is the one to have.
 
Whatever you do make sure you have the correct power going to the GD Rom or you will fry it instantly.
 
The Naomi 2 is supposed to be able to run the N2 and GD-rom with just the Capcom i/o unlike the N1. Most people say to use a seperate power supply anyway just in case.
 
Whatever you do make sure you have the correct power going to the GD Rom or you will fry it instantly.

3.3v correct? Might be time to buy a multimeter. I need to find a Sega PSU, I have a ATX psu and the PSU thats in my Tekken 4, which looks like a ATCX PSU as well but I heard its easier to set up with a Sega PSU.

The Naomi 2 is supposed to be able to run the N2 and GD-rom with just the Capcom i/o unlike the N1. Most people say to use a seperate power supply anyway just in case.

Do you just run two power supplies and merge the AC and run it together to the wall outlet?
 
Back
Top Bottom