- Joined
- Mar 19, 2011
- Messages
- 793
- Reaction score
- 36
Hey I got a general question for those of you who know anything about the power amp and lowpass amps used in Sega's Model 2 system. It appears in the diagram that there is as specific transformer used to supply power to the audio system. The manual says it outputs about 12.5v at 6A and I was wondering if it was a DC voltage? And let's say if I used an ATX psu from an older computer for the main game boards, it can support a 13 amp load on the 12v rail. Would that be sufficient enough? Or would ya'll have any suggestions for setting it up so at least I can get a response from the audio section through just the front 2 channels. I know this rig also supports 2 tweeters and a subwoofer besides the front L ad R audio channels.
Oh and another question is if anyone knows where I could find a 'good' wiring diagram? The www.sauservice.com site provides a crappy scan quality of their manuals which makes small text completely unreadable.
Oh and another question is if anyone knows where I could find a 'good' wiring diagram? The www.sauservice.com site provides a crappy scan quality of their manuals which makes small text completely unreadable.
