Sega Afterburner 2 Deluxe Sitdown

soundgood

New member
Joined
Jan 15, 2007
Messages
12
Reaction score
0
Location
San Jose, California
I just picked up 2 of these Afterburner 2 Deluxe Sitdowns. Have one up and running now but have a few problems. Some(not all) of the graphics are a bit glitchy. The Terrian and airplanes. I have replaced all of the Eproms and still having problems. Anybody have any recomendations?

Also in the process I have lost sound(while playing). I can here the amp come on line but no sound.

I am looking for another PCB thats working in the meantime. Will take another crack at trouble shooting this week-end. Any words of wisdom is much appreciated.

These both will be sweet cabs once they are fixed. Not to many around.

You can email me at [email protected] too. Thanks!
 
try removing and reinstallign every chip in its socket. I had dust bridging the gaps between the chip legs.

If that doesnt work, try 'rinsing' the board with water. I used my dish sprayer in my kitchen sink.

Hold the board upside down so that water doesnt get into any chip holes.

Be sure to dry the board with a blow dryer. elsewise the rinse water could cause corrosion.

This fixed my graphics issues with my afterburner.
 
Back
Top Bottom