Seeburg m100b

DTAR

Member

Donor 2011, 2019
Joined
Aug 18, 2011
Messages
196
Reaction score
16
Location
LOS ANGELES, California
i got a m100b that almost works but it will reject the record right away. i check the trip switch on the mech and the with alone works but when i connect it it gounds out...not sure what it should do..might be connected wrong. any one have any ideas or a pic of the switch and wiring or a schematic of the mech?
Matt
 
i think it might be the its not "locking" in on the cog and just skips the whole playing part.
 
the clutch is probably not freely exiting the LOAD wormgear pin, forcing immediate reject. i have seen this many times. it is a fairly easy removal, then i soak the bits in alcohol, scrub them down and reassemble with lubriplate and SAE20 oil.
 
Back
Top Bottom