Seattle Board Carnevil help?

bigsleepy

New member
Joined
Aug 16, 2008
Messages
689
Reaction score
0
Location
Eugene, Oregon
I have a Carnevil on a midway Seattle board in a Dynamo cabinet.

It looks clean, but for some reason the monitor comes up either blue or grey with some horizontal lines.

I've swapped the HD, and the ribbon cable.. CJ suggested that it might need a new bootrom (eprom).

Anybody know about these?


here's some pics/..
 

Attachments

  • IMG_0232.jpg
    IMG_0232.jpg
    71.9 KB · Views: 19
  • IMG_0233.jpg
    IMG_0233.jpg
    46.1 KB · Views: 12
theres alot of seattle boards.. thankfully theyre basically the same except some have slower prosessors than others....


i believe id get on on fleabay or here and pickup a cheap working blitz 99 board, swap your roms, install the carnievil gun board, and viola..


an official carnevil board will be horribly expensive and hard to find.

ALso eyeball around the hd power connector on the main board, they tend to fry diodes and stuff there..


also have you tested your +5 volts yet? tried reseating the roms yet?
 
Back
Top Bottom