Sea wolf power supply board Caps

jltlarry

New member
Joined
Jul 15, 2009
Messages
151
Reaction score
2
Location
Williamston, Michigan
To the Board repair specialists on this site: I have decided to revamp my Sea wolf power supply board ( 0080-00904-8800 ) due to a humm in the speaker. It was suggested that I rebuild it. I am not sure where to get the following CAPS:

6000uF@35vdc
20,000uF@16vdc
2200uF@25vdc
1000uF@35Volts
470uF@16V

I have only rebuilt one set of AR2 boards and was able to get kits for those.
This one, however, I cant seem to find any drawings for it. So I took the Numbers right off the board.
If someone could guide me in the right direction, it would be much appreciated.
 
Back
Top Bottom