Sea Wolf PCB Problem/Damage

Snazzy81

New member
Joined
Nov 11, 2008
Messages
25
Reaction score
3
Location
Hamilton, Ontario, Canada
I made a huge mistake with my Sea Wolf PCB a couple months ago. I plugged in the single connector backwards (the one connecting to the EPROM board). The fuse blew in the bottom of the cabinet. I replaced the fuse and corrected the connector position, but now I get garbage on the screen and constant sound from the sound board.

Has anyone done this and can point to what I may need to replace?
 
I'd also like to know if I bought a space invaders boardset, would most of the parts be the same? I think the CPU board is pretty much identical, would just need to make sure the EEPROM section is the same.
 
Back
Top Bottom