sea devil ship unit question

pinnut

Active member
Joined
Aug 3, 2010
Messages
1,084
Reaction score
20
Location
New York
there is a red paint mark on one of the ships, and matching mark on the ship unit frame. the ship position disc unit also has a red mark on the disc, and a matching one on one of the fingers. when the ship is lined up with the frame mark, the position disc is about 180 out from its disc mark. are these factory marks that can be trusted? any tips on lining this thing up properly?

thanks
 
pinnut

Good evening...when you plug in with a credit. Those red marks are from an old technician stating that was the home point for step units, etc...

So to adjust...credit up, hit reset, have the power strip with you turn power off. Your red lines should match at reset. Check your red marks on fingers and bakelight disc. Make sure that you are careful and only adjust if the fingers if required. Regarding the boats that's one that I can't speak too.

Good luck...

OHEMIO
 
Back
Top Bottom