NEW Screened printed artwork. What is needed?

darinjacobs

Well-known member
Joined
Jan 28, 2009
Messages
3,474
Reaction score
1,162
Location
Crown Point, Indiana
Very close to being caught up on new projects and reprints. Interested in seeing what people think needs to be screened.

Keep in mind screen printing has a large upfront cost and requires a large qty to be printed compared to digital-inkjet solvent. Lots of new, younger members on KLOV that might not be aware of this. If you need a one-off or a small run of something it cannot be screened by me.

Lately I've been asked to screen Moon Patrol bezel, I Robot side art and Qbert upper and lower cpos (apparently the current options were nor printed accurately). But there doesn't seem to be much traction to move forward.

Any new project would require a decent non-faded sample to work from.

What say you?
 
I would love to see I Robot side art but I understand not a big demand for this side art.
 
Tempest cocktail glass -> done
Robotron CPO -> done
Robotron bezel -> done

:)

Stargate bezel? -> might have enough interest? Was some random talk about this one. Not sure if anyone else presently does it.

Do another run of your MWMS art? (CPO, side art, bezel)
 
How about some NEW creative custom art for JROK projects ...

  • Berzerk/Frenzy combo marquee, bezel and CPO(?) - fits BZRK/FRNZY cabinets
  • Mylstar combo marquee, bezel (to match recent run of CPOs) **
  • ZooQ combo marquee, bezel and CPO **
These run both vertical and horizontal, so this complicates the design and orders.
 
I'm broke so I throw these ideas out without intent to buy them myself, but:

- Turbo mini side art

- Major Havoc side art, both conversion or dedicated, since repro PCBs are soon to come out

- DECO cassette system artwork, since it's rumored a cassette replacing multi-board is in the works (thank god)

- Pepper II artwork, I don't think anyone is doing those right now

+1 on the Star Wars cockpit side art idea, although I imagine there are rights that need to be paid for, SW is an unforgiving franchise.
 
Last edited:
I'd like to see somebody do correct Donkey Kong art and offer in both TM and no TM versions.

You could re-run White Water pinball.

Popeye?

DK Jr.?

DK 3?
 
- Major Havoc side art, both conversion or dedicated, since repro PCBs are soon to come out


  • PA already has the MH dedicated side art and CPO.
  • PA used to have the MH conversion (SD) CPO.
  • TOG has (if asked) the MH conversion (SD and TMPST) side art.
  • Not sure about MH conversion (TMPST) CPO.
  • AtariScott / TOG have the SD->MH marquee and the MH dedicated marquee (translight/glass); not sure about TMPST->MH marquee
 
These may be viable considering the popularity of Williams games in the UK.

Defender bezels
Defender cocktail cpos
 
  • PA already has the MH dedicated side art and CPO.
  • PA used to have the MH conversion (SD) CPO.
  • TOG has (if asked) the MH conversion (SD and TMPST) side art.
  • Not sure about MH conversion (TMPST) CPO.
  • AtariScott / TOG have the SD->MH marquee and the MH dedicated marquee (translight/glass); not sure about TMPST->MH marquee

Ah, I stand corrected! :D
 
I'd like to see somebody do correct Donkey Kong art and offer in both TM and no TM versions.

You could re-run White Water pinball.

Popeye?

DK Jr.?

DK 3?

Anyone have an NOS or non-faded original DK side art piece? I have done several runs of DK side art but it's been many years and I repro'd a repro. So it had the same issues most talk about.
 
I'd like to see somebody do correct Donkey Kong art and offer in both TM and no TM versions.

You could re-run White Water pinball.

Popeye?

DK Jr.?

DK 3?

DK3 side art!

I know I'm dreaming, but there are several Nintendo shooter titles that seemingly no one makes repro art for that I would love to see made available.

Radar Scope, Space Demon, HeliFire, etc. all have the same or similar bezel design with a different color scheme. The control panels are very similar as well, and I'm not sure that any of these games even had side art?
 
Back
Top Bottom