Screen Orientation for K7501 Yoke

Arcade1VA

Well-known member
Joined
Apr 20, 2008
Messages
1,788
Reaction score
164
Location
Illinois
I keep forgetting this for some reason, but I finally got everything good to go on my Daytona, but when I plugged the monitor yoke in, it is upsidedown and backwards on the screen. Do I flip the red/blue and green/yellow at their respective plugs 180 degrees?
 
Do I flip the red/blue and green/yellow at their respective plugs 180 degrees?

Yes.
Just remember to keep the pairs together. Two are usually closer together. (i.e. red/blue) Two are spread further apart. (i.e. yellow/green)
Basically any pair that are side by side already, just reverse the pair.

UNLESS this is a G07.... different setup.
 
That's what I thought. The plugs are quite a ways apart from eachother, so the pairs must be separated to even plug into the chassis.
 
Duh.... I wasn't even thinking K7500...just in general.
Yeah, kinda hard to mix those up, just unplug, flip, plug it back in.
 
Back
Top Bottom