Schematics needed RGB1401

mariosim

New member
Joined
Nov 11, 2007
Messages
1,705
Reaction score
9
Location
Arizona
May be a longshot. The chasis came out of a Sigma video poker machine and is obviously missing parts. Anyone have a link that would help?
 
I have an RGB1401A, 1701A & 2501A manual that I need to scan some time or another.
It includes a bunch of component datasheets which I may or may not include in the scan.

If there is a particular bit of information you need let me know, otherwise I will try to get a decent scan of it done shortly. (this gives me a good reason to do it since I've had it forever now)
 
I have an RGB1401A, 1701A & 2501A manual that I need to scan some time or another.
It includes a bunch of component datasheets which I may or may not include in the scan.

If there is a particular bit of information you need let me know, otherwise I will try to get a decent scan of it done shortly. (this gives me a good reason to do it since I've had it forever now)

thanks for the quick reply! mine is a mine is a 1401b, but the a version may work. the chasis has unpopulated blank spots that may need to be filled, and burnt blank spots that need to be filled. whatever info you can give me would be most appreciated.
 
I'll double check, but I believe this manual includes some 1401B info as well.

It's not the greatest print in the world, so I'll try to get it scanned well enough to where the file size isn't toooo huge.
 
OK, see if yo can get this and if it helps any.
Had to scan it at a little higher resolution otherwise the quality would have been horrible, so in turn the file size was bigger.
http://www.4shared.com/document/mw_78QmM/RGB_1401A-1701A-2501A.html

There was another 15 pages to it, but all they were were component datasheets that can be found all over the web, figured I'd leave those out.
 
Back
Top Bottom