Satans Hollow solid screen

cmkryzer

Member
Joined
Jan 28, 2011
Messages
214
Reaction score
5
Location
Minnesota
Just pick up this Satans Hollow, plugged in, I get his solid kind of waves looking screen, though up in the upper right hand corner i can make out some of the screen that is supposed to be. No sounds also.
I went thru and reseated all the plugs on the boards with no change.
Anyone have any other ideas?
Thanks in advance ....
 
I can't tell much from that picture, but check the fuses (for both continuity and proper amperage), decrease the brightness on the monitor and go from there.

I bought a Pac-Man cocktail a few weeks ago from someone who clearly didn't know what they were doing. Some fuses were bad and only 1 of the 7 were the proper specs. Once I had them correct, I could see the game, but the brightness was way too high, the V Hold was way off and the green drive was cranked. After adjusting these (and one other minor problem), perfectly working game. People will do all kinds of stuff trying to "fix" these machines.
 
check the +5 voltage at one of the filter caps on the ssio. Most likely you have a bad power supply.
 
Satans Hollow...

See my post on your other thread. I can pretty much guarantee you the MCR power supply needs to be rebuilt & has battery damage on it.

Also, you mentioned the bottom of the cab had water damage & was swollen - the boards in that game are mounted at the bottom. I had one that the bottom of the board was all rusted out.
 
Back
Top Bottom