sanyo z2ab slight wave

Mattspad

Well-known member
Joined
Nov 21, 2015
Messages
3,072
Reaction score
598
Location
Florida
I finally brought my dk jr cocktail out of my grandparents garage. Now I notice the monitor has a very very very slight wave. It's been capped including the filter in the past 6 months by me. Tested the b+ and it was at 106.7. I know thats ever so slightly low but do you guys think thats the root of my issue? I'd like to know before I take out this beast. Thanks :)
 
try to get one it will help if you can capture it.

is your B+ fully adjustable and smooth as you turn the pot or is it erratic and jumps up and down as you adjust the pot?


Peace
Buffett
 
try to get one it will help if you can capture it.

is your B+ fully adjustable and smooth as you turn the pot or is it erratic and jumps up and down as you adjust the pot?


Peace
Buffett

Havent pulled it yet but I'll let you know probably friday because school and bs
 
Re-cap the power supply. Fixed the wave on my UR DK that had already had the chassis re-capped including filter cap. YMMV.
 
Had a slight wave with simpsons the other night. Problem was the chassis wasn't grounded. I realize the Sanyo is a different animal but hey, worth a shot
 
Back
Top Bottom