sanyo monitor problem - need help

THEDJ

New member
Joined
Oct 20, 2008
Messages
520
Reaction score
4
Location
SOUTHPORT, Indiana
I have a sanyo ez20 monitor wired into a jamma harness- (icade board) sync is fine..

Colors are off - all the colors look like they are a negitive - see photo...

monitor is tested and works good - (tested on a red tent)

Any ideas?
 
Picture os sanyo ez monitor problem

ALL COLOR LOOK LIKE A NEGATIVE.

monitor tested and working.


thanks
chris
 

Attachments

  • 2012-11-09_13-17-38_658.jpg
    2012-11-09_13-17-38_658.jpg
    44.4 KB · Views: 16
inverter is hooked up

the inverter is hooked up.

one side comming from the plug on the monitor chasis, and the otherside goes to the jamma monitor connections.

any other ideas?

thanks
chris
 
there are two sets of video out headers on the inverter.

use the invert out set of header pins.

Peace
Buffett
 
is the power hooked up to the inverter board.

the little red wire that comes off the chassis and goes to the 3 pin connector in the inverter.

Peace
Buffett
 
Back
Top Bottom