Sanyo Issues

copious

Well-known member
Joined
Oct 16, 2006
Messages
2,224
Reaction score
94
Location
Sparta, New Jersey
So my DK Jr goes up in smoke nice smell and all, I had a spare chassis that worked 2 months ago and I install it and guess what nothing the sound works but no image. I crank up the brightness and nothing. I plug the game board into a punchout cab and it comes up. Any help diagnosising the problem would be apreciated.

I checked the fuse on the monitor chasis and it's OK anywhere else to that a fuse can cuse this issue? the game does play blind.
 
This needs to be moved to the monitor section.

Which brightness did you try cranking up - the one on the remote board or the one on the flyback? Or both? Do you have neck glow?

Considering that the sound board is powered via the monitor, it's unusual to have the sound work and not the monitor...
 
bith brightness were increased. Yes the sound works and I can't see any neck glow. I would move this to the monitor section but I don't know how too.
 
Start with checking the B+. There is a Sanyo sticky here, so check it out...
 
Back
Top Bottom