Sanyo Flyback / Sync Issue?

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
On my DK3 Machine, I cannot get the sync set just right, the image will jolt across the screen once every 5 seconds or so. I have tried slowly adjusting the pot in small increments, but it still does it. The picture is fine otherwise. I noticed a crackle coming from the flyback. The voltage is fine, at 109V. What needs to be done? Thanks
 
if its coming from the flyback, it might be going bad,arcadecup has them for 30 bucks. turn the lights out and try to see if there is any arching when it crackles
 
I dont see anything like that, I restarted it and its not doing it now.. So The flyback is probably bad, but do you think the sync is a seperate issue? Or can that be caused by the flyback?
 
I think I need to do all of my gaming exclusively on my NES, when that thing goes bad, you just toss it in the trash and its 25$ for a new one.
 
Back
Top Bottom