Sanyo EZ20 C406 bridged to R411?

OIB1981

Member
Joined
Jan 13, 2010
Messages
711
Reaction score
2
Location
West Virginia
Just a quick question. I did a cap kit on my friends Sanyo EZ20 and I accidentally bridged C406 Positive side to R411. I couldn't get it to un bridge with Solder sucker and the Wick so I got the solder as low as possible then dug it out with X-acto knife. In the end the monitor booted up but he said ever few min or so it'll flicker.

So skip forward when I did my cap kit the other day I notice that C406 and R411 has a trace between them. I guess i dug the trace out and that might be causing the flickering. So correct me if I'm wrong but I'm guessing I should re bridge that connection?
 
Yeah, looks as though if you cut that trace..... then that cap is literally doing nothing now.
 

Attachments

  • untitled.JPG
    untitled.JPG
    9.6 KB · Views: 5
Back
Top Bottom