Sanyo EZ red lines and hum.

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
I just got a monitor back from Chad at monitorboss. It was working 100% for him, when I powered it up, I get a red tint to the whole screen and verticle red lines. It does this on multiple boards. Also, the volume hum is LOUD no matter where the pot is set. Ideas?
 
I just got a monitor back from Chad at monitorboss. It was working 100% for him, when I powered it up, I get a red tint to the whole screen and verticle red lines. It does this on multiple boards. Also, the volume hum is LOUD no matter where the pot is set. Ideas?

The volume hum is quite common on Nintendo games.

Have you tried turning down the red (pots) on the neckboard? I THINK there are two; a normal drive and a cut-off. Don't ask me what the difference is. I don't really know.
 
I tried everything with the color knobs. All down all the way, all up all the way, and all at half. The red backround / red jail bars are still present...
 
Back
Top Bottom