Sanyo Ez Monitor

wmacmonagle

Active member

Donor 2012
Joined
Jul 6, 2010
Messages
2,059
Reaction score
10
Location
Rosamond, California
having problem wtih my monitor and i went to sw301 and noticed it is in normal mode.

Flow Charts says I have to replace and wantd to confirm if this is what i needed to replace TR402/403...

SanyonintendoMonitor.jpg



im not very good with solder and never discharge a monitor before.

I need to know if i have to replace and i will need to discharge or maybe one klover could help me and telling me the short cut to fix that problem..

Much appreciate..

BTW this monitor is pulled out from donkey kong jr Cocktail. It do have inverter.
 
You have vertical collapse. On that monitor, TR402 & TR403 are the most likely culprits. You can try re-flowing the solder for both and verifying that there are no broken traces to either of them.

You will need to discharge the monitor, because you will have to pull the monitor chassis to make the repairs.
 
Checked my local store and they do not have that parts.. Which store online I could find

TR402 (part nr. 2SC2073R, NPN)
TR403 (part nr. 2SA940R, PNP)

If anyone knows.. Please post here so I can order.

Please confirm this is right part number for my sanyo ez thanks
 
checked my local store and they do not have that parts.. Which store online i could find

tr402 (part nr. 2sc2073r, npn)
tr403 (part nr. 2sa940r, pnp)

if anyone knows.. Please post here so i can order.

Please confirm this is right part number for my sanyo ez thanks

nte 375
nte 398
 
i am so idiot i found this moniotr is 17 inch.. seemly this would be

SANYO EZ 17?

so.. vertical collapse..

i had friend helped and placed

nte 475 into tr223
nte 498 into tr224

I havent fire it up but would like to know if it s good or not...

i noticed there is anohter tr222 (i think).. ..

those 3 are on the neck board.. I was not able to find tr402/403 anywhere on 17inch monitor.

thanks in advance
 
Last edited:
I know this is stupid things to do that s why i m asking here.. if its a NO NO .. that s fine.. lmk which part and where I should replace to fix vertical collapse..

LMK.. hope i ll know by asap before im too tempt and plug and bye bye kansas!

i am so idiot i found this moniotr is 17 inch.. seemly this would be

SANYO EZ 17?

so.. vertical collapse..

i had friend helped and placed

nte 475 into tr223
nte 498 into tr224

I havent fire it up but would like to know if it s good or not...

i noticed there is anohter tr222 (i think).. ..

those 3 are on the neck board.. I was not able to find tr402/403 anywhere on 17inch monitor.

thanks in advance
 
Sanyo 17EZV = no such animal

Identify the monitor and your questions will be answered.

My guess, would be an 18ZAB or maybe an 18ZAW. If you have no clue, post a bunch of pics of it for all to see.
 
LOL Dozert! Yes I will do that when Im home today.

Thanks!

Sanyo 17EZV = no such animal

Identify the monitor and your questions will be answered.

My guess, would be an 18ZAB or maybe an 18ZAW. If you have no clue, post a bunch of pics of it for all to see.
 
i fired up and still vertical collapse.. no changes....

the two TR i had pulled out to replace with 475 and 498.. there is 3rd tr piece on neck board also that i has not replace yet..

i noticed something about those 3 pieces.. all has number stamped on it happened to be all same..

C1756

does this mean something????

LMK

thanks

make sure that you plug it in to the 100vac iso to test it.
 
Bumped. This sanyo s for my cocktail.

I was not able to find TR402/403 on this sanyo 18zab..

help!

thank you in advance

p.s.

i would need part number too thanks
 
Back
Top Bottom