Sanyo EZ 20 I blew something?

Evil Reny

Member

Donor 2011, 2013
Joined
Jun 9, 2009
Messages
258
Reaction score
0
Location
Calgary, ALBERTA, Canada
Just capped this monitor and put it in my MB. When I fired it up it looked great, I went to adjust the colors ect. When I heard a spark and smelled a little burning that's when I noticed a wire coming off the chassis was touching the frame.

This wire was soldered to R240

Now I have no picture and no neck glow

HELP

I checked fuses they're good checked the HOT it's good
 
Was it a red wire? if so, that's probably the 12V wire that goes to the inverter board (if you have one). If you smelled burning, it's time to look for burnt parts - possibly R240...
 
Should be tested. Could be other parts too.

Tie off that red wire for sure so this doesn't happen again....
 
Back
Top Bottom