Sanyo DK Issues

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
Heres a picture of what my new DK is doing, It has this bright bar on the left side of the monitor. And the bottom of the girder is about 2.5" from the bottom of the screen, on my first DK its only about an inch. Ive messed with the controls on the back but cant seem to get it any larger/lower.

Could some tell me how to get this lower? Maybe the controls do work but I'm not doing it right, and how to get rid of the red bar. The 2nd picture is the machine thats properly working
 

Attachments

  • redbar.jpg
    redbar.jpg
    85.2 KB · Views: 26
  • normal.jpg
    normal.jpg
    88.4 KB · Views: 22
Will the cap kit lower the image? How far from the bottom of the screen should the lowest girder be?
 
Will the cap kit lower the image? How far from the bottom of the screen should the lowest girder be?

There are 2 pots on the boardset. One will control vertical postion and the other controls horizontal. Adjust those until the image is centered. - Barry
 
Back
Top Bottom