Sanyo 20ez no video

bradp56

New member
Joined
Jan 25, 2010
Messages
523
Reaction score
0
Location
Baldwin, Maryland
I hope someone could suggest something to me. I have a nintendo 20ez going to my DK. I was replacing the pots because of scrolling issues after I already replaced what the flow chart said. Anyway I replaced the V Hold first and I still had the scrolling issue so I took it out and replaced the other pots. But now there is no picture on the monitor. I noticed that the neck on the tube doesn't light up now and crackle like it used to. The game comes up fine and I did notice that when discharging there is no charge, so its like the flyback is getting nothing. I hope I didnt kill it. I looked and I dont see any cracks or burns.

Thank you;
 
Also I had the issue after replacing the H hold. I am not sure of this is the cause but one of the pads came off the H hold holes on the pcb. I still soldered on it. Could the pad coming off cause this because there is no neck glow either.
 
Back
Top Bottom