Sanyo 20EZ No Picture but light on Neck

Straker

Member
Joined
Oct 13, 2009
Messages
145
Reaction score
0
Location
Ludlow, Massachusetts
I was trying to adjust this monitor a long time ago and I used a metal srew driver to move one of the pots. Of course something shorted out.

I just got back to the monitor and noticed there was a missing fuse and I replaced that. It was looking for 125v 300ma fuse but I could only find a 250v .31 amp fuse. I put that in and the neck of the tube lights up but the picture tube is dark. I then turned the machine off and connected the DK board to the harness. Now I get sound on start up put the neck of the tube does not light up. When I remove the PCB from the harness and start the machine backup again, the neck of the tube lights up again.

Any ideas as to what the problem could be? I am wondering if orginally I only blew the fuse and that maybe now there is another problem that is unrelated.
 
Back
Top Bottom