doesbenfoldfive
New member
I bought a working chassis and it was cracked in shipping. I connected all the broken connections with wire and put it back in.
When I turn it on, nothing shows on the screen and I don't see neckglow.
I can discharge the monitor after each start up and there is a good pop.
It's in a VS cab and I think the main board was fried. But shouldn't I still see something on the screen?
When I turn it on, nothing shows on the screen and I don't see neckglow.
I can discharge the monitor after each start up and there is a good pop.
It's in a VS cab and I think the main board was fried. But shouldn't I still see something on the screen?