Sanyo 20 inch tubes available N. Texas

komodo

Well-known member

Donor 2019, 2021
Joined
Apr 25, 2007
Messages
5,011
Reaction score
101
Location
Flower Mound, Texas
Rating - 100%
141   0   0
Picked up about 10 Sanyo tubes and frames. Only one of them has a chassis and it is in questionable condition. All of the tubes have yokes except one. These would be ideal for anyone that has a Nintendo cabinet needing a better tube or lots of spare chassis kicking around. I'd like $10 each picked up in Denton, TX. No shipping on these right now. Only one of them has what I consider bad burn on it. The rest are pretty clean. Most have light ghosting for burn. Don't want to dump them but they are taking up too much space in my storage unit. If interested, PM me. Will be out of town for a few days so you'll have to work with me on the pickup.
 
Here is a link to photos of the tubes for anyone interested. They uploaded in reverse order and I don't want to take the time to rearrange them. The first photo is of monitor number 10 from the rear and then the front which has been marked with a sharpie. Yes, the sharpie will come off with Windex and a paper towel or a mr clean magic eraser. Any "Sworl" or "swirl" marks that appear in the galss are a result of my camera and not in the tube itself. If you enlarge the fronts you can see how "bad" the burn is. PM with questions. Will ship these if you are willing to pay the packing store prices and insurance if you want it. I have no boxes that will hold these. All my monitor boxes are dedicated to vector tubes.

http://picasaweb.google.com/pat.danis/Sanyo?feat=directlink
 
Ping Ernie or Eric... they are the local guys with a Ninty fetish.
 
Yeah, I still need a tube to replace that POS one that Jeremiah left me. Anything would be better than the burn in that it's got. I'll take 1 & 5 I guess.

By the way, don't these tube also work with G07 chassis?
 
Last edited:
Probably. You would need to check the impedance on the yoke and rewire the yoke connector (or split it up) as the G07 has a different connector than most chassis. The Sanyo is also a 20 inch tube whereas most G07's are 19 inchers (yes, I know there are small tube models). Nevertheless, I am pretty sure it will work. I'm not home so will have to check the yokes and compare when I get back. I know Ken has a listing somewhere of yoke impedances that you can use to check. The impedances are listed as Ohm values which is not entirely correct but accurate enough for our use.

Okay then, tubes 1, 2, 5, 6, and 7 are spoken for. ...and yes Eric, I know I owe you 6100s still. I will hopefully have 3 done this week. I FINALLY have some time off coming up.
 
I called Chris & got Ernie's number. I'll call him after he's off work to see if he wants a couple of the tubes.
 
...and yes Eric, I know I owe you 6100s still. I will hopefully have 3 done this week. I FINALLY have some time off coming up.

You know me, no worries there. I'm surprised you have ANY free time. I figured you'd be making up for lost flight time from the volcano fiasco.
 
I still owe you for that candy cab too Pat. Oh yeah, your monitor box is in the barn (I left it out there for you awhile back, but for got to tell you)
 
Back
Top Bottom