ggames
New member
Greetings all,
I'm in need of some help with this sanyo. Came out of a dk jr cocktail. The problem is it's missing white graphics and fonts. This is the same in the dk and with my MK2 board for testing. Looks like some of the crosshatch pattern is missing too. I have nice rgb color screens, but part of the color bar is gone. Tried every adjustment I could. The B+ is at 108v on the BJ pin. I did a cap job to all the caps on monitor board and sound board. Went over the board with magnifier glass and with my web cam and touched up all cracked joints. I replaced the cap on the inverter board and checked for cracks on it also. I thinking the inverter is good because it shows good rgb screens. Attached are some pictures.
Thanks for any help.
I'm in need of some help with this sanyo. Came out of a dk jr cocktail. The problem is it's missing white graphics and fonts. This is the same in the dk and with my MK2 board for testing. Looks like some of the crosshatch pattern is missing too. I have nice rgb color screens, but part of the color bar is gone. Tried every adjustment I could. The B+ is at 108v on the BJ pin. I did a cap job to all the caps on monitor board and sound board. Went over the board with magnifier glass and with my web cam and touched up all cracked joints. I replaced the cap on the inverter board and checked for cracks on it also. I thinking the inverter is good because it shows good rgb screens. Attached are some pictures.
Thanks for any help.