san franciso rush force feedback problem

bigaw

New member
Joined
Jun 6, 2010
Messages
144
Reaction score
0
Location
Riner, Virginia
machine steering wheel at 12 oclock jerks back and forth.it does test and calibration .while playing also makes car turn back and forth. hard to drive.when machine turns on does test all the way right and left then to middle but starts rocking back and forth a little bit by its self all time that machine is on.any help or ideas on how to fix.gears and belt are good.Thanks
 
Last edited:
I got one from Happ, part# 5014-12909-00, they were pricey $30+ shipping if I recall? Expensive for a 5K pot, but I tried a couple other 5K pots I had, didn't quite work, made the steering super sensitive. Ended up biting the bullet and getting that one from Happ, fixed my issue(Same as described by bigaw). What I'd like to know is where to get that pot or equivalent for less than $30?
 
pot replaced

you guys were right on the money replaced pot. working great Thanks again
 
Back
Top Bottom